Extra information will appear in this post.
TURBO CONTROL ARMS W/ELANTRA/NON-TURBO MOUNTS
Original Turbo cars use these rear mounts:
These mounts will slide on, and bolt to the end of the peg at the rear of the control arm.
These bushings can be pressed into the old mounts for a bolt-on solution:
SPF-1714K
IF YOU ARE SWAPPING TO NON-TURBO/ELANTRA STYLE REAR MOUNTS/BRACKETS LIKE THESE
BUT STILL PLAN ON USING YOUR TURBO CONTROL ARMS, you will need to order these:
SPF-0837K
OR
make your own sleeve so that the non-turbo SPF-1140K bushing(22mm ID) will fit properly over the control arm peg(20mm OD)
ALTERNATIVES TO SUPERPRO
30$ Energy Suspension bushings for Turbo control arms