4g61t.org

I did a boost leak test and I have a bad lower injector seal/insulator and need a part number from someone. I am hooping to find something local at one of the chain stores and would like a recommendation.
I tried Advance Auto with no success.
Thanks,
Joe

_________________
89 Colt GT 1.5 auto- conversion 4g63t 5-spd, L2A...
89 Colt GT 1.6 5spd- donor
92 VR4 32/1000 SOLD

Don't have a part # for you but I'm positive Napa can get them. I've ordered some from them before in the past.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

I normally buy mine from Bap auto here in Az.. and there like 5 bucks per set.. these guys are in NJ.. and alot cheaper (except for adding in shipping)..

http://injector-rehab.com/shop/DSM-450cc-Nikki-Kit.html




Steve

_________________
Steve 89 colt 2.3 stroker stock top end. evo3@20 psi 13.489@99.30mph 3/10 2012
On drag radials.auto trans.launching @ 5 psi and no traction thru 2nd.

Another option http://www.extremepsi.com/store/product ... t=0&page=1

_________________
89 Mirage Billet 20g 63t 12.4@120 417whp 400wtq @ English Racing.
89 Colt GT E316g
06 Silverado SS
07 ZX6R

I just went threw this problem with 3 different 4g63 I been building. I found out Beck Arnley stop carrying them, which is why Autozone and Advance didn't have them. My buddy at a Napa dealership not a store looked and couldn't find them, but my also doesn't look very hard for things. I would do what Noct said and go through Extremepsi. I just ordered a ton (6 sets at $10 a set of them) I found of old stock from Beck Arnley.

_________________
92 Colt GT 4G63t
92 Summit TSI AWD 4G63t Auto
92 Eagle Talon TSI AWD Auto DRag CaR
5 X 90 Talon TSI
90 GSX
99 GSX..........31 Dodge 4dr Rat Rod, 67 Catalina, 92 3kgt vr4, 83 Civic,4 00 F-350, 01 Chevy 2500HD
3 KIDS, FUTURE FIANCE, AND CAR ADDICTION

NAPA did not have the right part in stock; I went down to pick up the part after talking to them and the o-ring is what they had. I ordered a set through Extreme PSI because I knew it would work for me; though I did find some BECK/ARNLEY Part # 1580896, this is for a full set, at Rock Auto using Mitsubishi number MD087060 and the price was just $3.37. A great price if it has the right parts, I wanted a sure thing. I am close to finishing the conversion/swap.
Once I fix the idle surge I get to put the wheels on for the first time, get it off the jack stands, and make room for the Buick that needs a new intake.

_________________
89 Colt GT 1.5 auto- conversion 4g63t 5-spd, L2A...
89 Colt GT 1.6 5spd- donor
92 VR4 32/1000 SOLD

man screw the auto parts stores and pay $10-$20 just go by Lowes or Home Depot, if i had a part number for you I would give it but I go to Lowes for my lower seals, never had any leak problems. bring your old lower seals and 1 injector for sizing

_________________
95 Mirage S Sedan- Evo III Project {In Process}
91 Talon TSi AWD- SOLD
91 Mirage 4dr 4G63T -Daily
2016 Ford Edge Titanium -2L.0T AWD Wife
facebook.com/modicausmc

See here:

http://www.dsmtuners.com/forums/article ... ators.html

I've used this method on my GVR4 and will vouch for the efficacy of these rubber grommets!

^That's pretty sweet, another reason why I love DSM's and CSM's.

_________________
93 Mitsubishi Expo LRV 1.8/manual
95 Eagle Summit DL Coupe 1.5/manual
01 Mitsubishi Mirage ES Sedan 1.8/manual

I tried the home depot/lowes/anything else local path last year(2012) to no avail. Got them ordered from the local Mitsubishi dealer for cheap and they arrived 2 days later.

Part number is MD087060 btw.