| 4g61t.org http://www.4g61t.org/forum/ |
|
| oem 4x114 rim list? http://www.4g61t.org/forum/viewtopic.php?f=22&t=37738 |
Page 1 of 1 |
| Author: | king_of_the_street [ Tue Apr 30, 2013 4:51 pm ] |
| Post subject: | oem 4x114 rim list? |
Ok so with nice weather I'm bringing the colt out from hiding and fixing her to ride again. I have oz rally rims now, but I'm looking for some fresh new rims. Is there a list of cars that came with 4x114? At least 15", wider the better! Going junkyard for a look around, maybe find something good. Sorry if there is a list somewhere I couldn't find. |
|
| Author: | 92colt200e [ Tue Apr 30, 2013 8:01 pm ] |
| Post subject: | Re: oem 4x114 rim list? |
I've used Tiburon wheels before. |
|
| Author: | Evotistical [ Tue Apr 30, 2013 11:24 pm ] |
| Post subject: | Re: oem 4x114 rim list? |
93-9? Nissan altima. |
|
| Author: | CaptainTonus [ Tue Apr 30, 2013 11:58 pm ] |
| Post subject: | Re: oem 4x114 rim list? |
Pretty much all 4-lug Nissans are 4x114.3. I've never seen one that wasn't. 4-lug Toyotas, although most are RWD cars that will have the wrong offset. Any 4-lug Mitsubishi Some Hondas, such as Accords and Preludes are 4x114.3 A lot of the early 4-lug Fords from the 80's, such as fox-body Mustangs and Thunderbirds are 4x114.3 I believe some Mazdas were 4x114.3, like early FC RX-7's, but I don't know any others off the top of my head. |
|
| Author: | slowdsm [ Wed May 01, 2013 12:08 am ] |
| Post subject: | Re: oem 4x114 rim list? |
i know the 86 and 87 ford t-bird..turbo coupe models use 4x109.. i think stangs do also. also I just picked up a 93 mirage and there 4x100. Steve |
|
| Author: | Evotistical [ Wed May 01, 2013 6:28 am ] |
| Post subject: | Re: oem 4x114 rim list? |
pay attention to offset also, unless you want to look like a water strider, or rub your insides raw. I know that the altima rims are plug and play. |
|
| Author: | Crackerman [ Wed May 01, 2013 9:16 am ] |
| Post subject: | Re: oem 4x114 rim list? |
http://www.4g61t.org/forum/viewtopic.ph ... rd#p190642 there should be a few suggestions here.... |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|