4g61t.org

I just purchased a 89 colt with a awd swap from a 1g.

Well stock RX 7 wheels clear "16x8" +50mm"

Plan on running 225's if i can. I've searched on here but cannot find any links or info about the wheels. I don't mind rolling the fenders if i have to.


thanks, chase

Yes, they will fit. They will stick out quite a bit though, and look kind of stupid.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

Alright i'll keep searching my options then. I just don't want to be limited on my selection of 205 slicks/radials if i keep the stock 1g wheels

Last time I went hunting for stocker FD rims they were priced much higher than they deserved. You will likely be happier buying brand new rims that are exactly what you want and will not have been whooped on by some drift happy idiot.

+50 offset isn't that agressive right? You're not gonna have any problem on my opinion with that offset

_________________
95' Talon Tsi AWD- 11.7@118
DSM vs Sti: http://youtu.be/0rBoxKxQvNQ
89' Mirage AWD swapped- 11.5@128 stock frame turbo
1989 Mirage Turbo AWD 11.5 @ 127: http://youtu.be/AhtJuKT-c5U

+50 offset will set the center of the wheel further in, making it more likely to rub on suspension parts. RX7 wheels are 8" wide, which in my opinion is too wide for a CSM, so they stick out too.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus

I have a pair already at my house that i got from a friend when he got new wheels... they don't show much signs of wear at all.

Yeah the only reason i asked was because i already have a set at the house. I might just suck it up & run 205's on the stock 1g wheels

Anyone else have opinions?

I made up my mind. looks like I'm going to keep the stock 1g wheels on there & see how wide i can get before they rub. The car is AWD swapped so it might be a little different.

agree! i dont know why people overpriced their stock wheels more than aftermarket ones, even if they are the same brand

_________________
91' Mitsubishi Colt 4G67T FWD "The Minion" - 12.26@118
94' Mitsubishi Galant GS 4g63 Swap "White Unicorn"
95' Eagle Talon Tsi FWD "Ernie's car" - 13.92@104 *Rest In Parts*

I'll be PCSing to Carson soon. I will sell you my FD wheels for what i paid.. $200

Anyone have any experience with Diamond Racing steelies. I know all the Honda kids run them just thought I'd ask.


Thinking of purchasing a set of 15x6 or 15x7 with a -0 or -12 off set

Just looking for something wide enough to run slicks, sorry for all these questions, never owned a colt before, coming over from the DSM world