4g61t.org
http://www.4g61t.org/forum/

Jay racing alternator kit with Colt turbo half shaft
http://www.4g61t.org/forum/viewtopic.php?f=22&t=36863		 Page 1 of 1
Author:  ColtiXim [ Sun Sep 30, 2012 2:44 am ]
Post subject:  Jay racing alternator kit with Colt turbo half shaft
Well, i have received my Jay Racing kit but the lower bracket look more thick on one side.
The Colt half shaft need to be fixed on the bloc with the OEM AC bracket (cutted) or 8mm spacer: http://www.4g61t.org/forum/viewtopic.php?f=6&t=35529

Image

I have found more explication on the Evo 123 forum : http://www.evo123.net/showthread.php?t=8537
Look the post #20 .

I have cloned the Jay kit with steel metal for best strong and i have now a perfect thickness

Plasma cutting
Image

Image

Made a template for soldering
Image

New bracket vs hold ( we have also stepped the rear side like the Jay bracket )
Image

Let me know what you think ?
Remy
Author:  MANNY-4AGW6D3 [ Sun Sep 30, 2012 6:18 pm ]
Post subject:  Re: Jay racing alternator kit with Colt turbo half shaft
Looks good! :supz: would you consider making another and selling it?
Author:  king_of_the_street [ Sun Sep 30, 2012 8:43 pm ]
Post subject:  Re: Jay racing alternator kit with Colt turbo half shaft
Looks nice, now you can sell copies haha.. Plasma cutting is fun!! I have one the jay racing tool for doing timing belts.
Author:  Crackerman [ Tue Oct 02, 2012 2:35 pm ]
Post subject:  Re: Jay racing alternator kit with Colt turbo half shaft
i made mine out of 5/16 plate, a large bolt (drilled through) and thin washers on the back for the "step" about 3 years ago

worked great.
then i found a better way that does not need that tensioning rod.
copy the buschur racing kit, and tension the alternator off the block. keeps it straight and is much sturdier, and i have not thrown a belt yet.
Author:  ColtiXim [ Wed Oct 31, 2012 3:07 pm ]
Post subject:  Re: Jay racing alternator kit with Colt turbo half shaft
Yes if you use the tensioner rod from he Jay Kit you need also to relocate the PTU, the rod hit the PTU bracket ...

I have made a tensioner with a aluminum bar plate, finnaly i use only the belt from the Jay kit and not i dont sell a lower bracket copy sorry .

Image
Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/