4g61t.org

Can i still use these pistons it looks like they litely tapped the valves and they have a few small burs on them or can i get away with just filing the burs off





Thanks for the help Pat

_________________
Member 209
89 Colt GT RIP
92 Mirage 4dr
91 Celica
http://members.sounddomain.com/gage1
http://community.webshots.com/user/miragegt

Those other ones should be fine. They look like mine did when my car threw it's belt. What the he|| happened to number 4?

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

i still dont know that is the way i got the motor but are you sure i can still use these

_________________
Member 209
89 Colt GT RIP
92 Mirage 4dr
91 Celica
http://members.sounddomain.com/gage1
http://community.webshots.com/user/miragegt

yeah you can still use them....but damn #4....shes till F**king bueno

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...

?? #4 buneo

_________________
Member 209
89 Colt GT RIP
92 Mirage 4dr
91 Celica
http://members.sounddomain.com/gage1
http://community.webshots.com/user/miragegt

bueno = good in spanish......sorry i was just being a sarcastic smart a$$ with the piston.....i wont do it again

_________________
I own a CSM.
I live my life 1 repair at a time.
Nothing matters...not my crew...my bills, nor my friends drama...
For those 10 months or less... I'm broke...

Bueno is spanish for "good" basically. He was being sarcastic. The other 3 pistons are usable, but I would be a little worried about the #4 cylinder and combustion chamber. The damage to the piston looks severe enough to possibly have scored the cylinder walls.

The block should be fine, but have it checked out just to be sure. I don't know if you plan on using that head or not. It looks like that valve broke off while the engine was still running and it tore the sh*t out of everything and obviously munched the piston.

You may be hard pressed to get it cleaned up properly. Those divots look pretty deep and you may compromise proper compression by trying to take them out.

_________________
Jason Veraldi
Scammer
http://www.4g61t.org/forum/viewtopic.php?f=3&t=34532

well i ran my finger throughout the cyl and it was as smooth as a you know what and i looked at it for a bout a halfhour and all i seen was croshatch marks it was the same in all the other cyls it almost lookes like the motor was recently redone as with how clean the pistons are i dident wipe them off that is the way they were when i pulled the head

so i just was hopeing that i dident have to get 3 more pistons

_________________
Member 209
89 Colt GT RIP
92 Mirage 4dr
91 Celica
http://members.sounddomain.com/gage1
http://community.webshots.com/user/miragegt

thats one messed up piston.... Looks like it took a beating.

_________________
92' Dodge Colt 200GT - 4G63T - Taking Offers.

Lightly tapped the valves......#4 must have been "Lightly Tapped" by Lennox Lewis.

_________________
Member #533
1989 Colt GT (4G63 and a Lil 16G)Silver, 89Sonata tranny
1974 Fiat 124 Spider (Piece of S*it but I love it)
1995 Windstar (Wife's Child-bearer)