| 4g61t.org http://www.4g61t.org/forum/ |
|
| Let me get this straight... http://www.4g61t.org/forum/viewtopic.php?f=22&t=3587 |
Page 1 of 1 |
| Author: | Fiatman [ Tue Apr 08, 2003 10:40 am ] |
| Post subject: | Let me get this straight... |
Just wanted to clarify, seeing as I have access to some Laser rear springs, but they are FWD. It sounds like the spring rates are the same for the FWD laser and GT colt rear springs. I wouldn't think that should be true, but can anyone verify? Jason found the spring rates for our colt springs, but who knows stock rates for the T/E/L? |
|
| Author: | Guest [ Tue Apr 08, 2003 11:44 am ] |
| Post subject: | |
go here: http://www.ecanfix.com/~manualcd/index2.htm Download the 1G DSM Tech manual, (I can't do it at work) and the spring rates should be found in there. At least I think I found the mirage spring rates in the Mirage Tech manual that I have. As for the stiff springs on the turbo mirage. The mirage was mitsubishi's attempt at making a low-buck weekend race car (ie, autox, track schools, timetrials). The 1G FWD DSM's, well they weren't designed for that. 
|
|
| Author: | swe-colt [ Tue Apr 08, 2003 12:07 pm ] |
| Post subject: | |
does ANYONE here have that manual for download? I can't afford this backup manual, and shipping is alot. I live in Sweden if anyone missed that. |
|
| Author: | Fiatman [ Tue Apr 08, 2003 4:19 pm ] |
| Post subject: | Just for reference: |
Okay, here's the rates for FWD and AWD T/E/L: Front: AWD: 146 FWD: 134 Rear: AWD:140 FWD:128.8 So, they're still a step up from the Colt, but it's a small step. The spring lengths are different, however, between FWD and AWD for the rears (316.5mm to 332.5 mm). Or so the book says. Will investigate. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|