I have a base model that I put the GT trim mouldings on.
The black bumpers I striped w/ wide red pinstriping.
I know its not exact but it looks okay from across the parking lot!
-Shawn
| 4g61t.org http://www.4g61t.org/forum/ |
|
| GT red stripe/piping source? http://www.4g61t.org/forum/viewtopic.php?f=22&t=33781 |
Page 1 of 1 |
| Author: | Cuda-68 [ Thu Nov 18, 2010 3:55 pm ] |
| Post subject: | GT red stripe/piping source? |
Has anyone had luck finding a source or suitable replacement? |
|
| Author: | maroonmetallic [ Wed Nov 24, 2010 7:58 pm ] |
| Post subject: | Re: GT red stripe/piping source? |
I have a base model that I put the GT trim mouldings on. The black bumpers I striped w/ wide red pinstriping. I know its not exact but it looks okay from across the parking lot! -Shawn |
|
| Author: | Devolution [ Wed Nov 24, 2010 11:52 pm ] |
| Post subject: | Re: GT red stripe/piping source? |
i just used 1/4" white pinstripe from the local auto parts place. 
|
|
| Author: | Cuda-68 [ Thu Nov 25, 2010 1:55 am ] |
| Post subject: | Re: GT red stripe/piping source? |
Thanks guys! My stock bumper cover is not in the greatest shape and I have an extra Summit bumper cover in great shape. The red striping has a loose spot on the original yet I was afraid to mess with it for fear of ruining the stripe. After reading your replies I went up to the garage and carefully pried the loose red stripe up, it is just glued on and fairly flat. It measures exactly 1/4". |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|