| 4g61t.org http://www.4g61t.org/forum/ |
|
| Wiring a evo mas in a 1G http://www.4g61t.org/forum/viewtopic.php?f=22&t=32695 |
Page 1 of 1 |
| Author: | pttcolt [ Sat May 15, 2010 10:38 pm ] |
| Post subject: | Wiring a evo mas in a 1G |
Don't know if anyone has ever done a write up on this. I had wired an evo8 mas into a car according to a write up Craig (gsx) found on dsm tuners. The original write up was done according to pin locations on the plugs. I preferred having it written up according to wire colors. So here it goes.. Dsm wires. Evo wires Green/red. ------- green/yellow Green/yellow. -------- green/white Green/blue. -------- white/green Red. ------- red/dots Green/black. ------- black Green/orange. ------- red/blue Green/white. ------- green/blue This was done on a 91 dsm harness with a evo8 mas air. The mas air plug came off a newer diamante. I don't know if the wiring on a evo are the same colors. I did the write up while looking at the back of the mas air plug going from right to left with the release tab facing up. Hope this is written understandably and it can help anyone that wants to use an evo mas. |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|