Quote:
Quote:
Front KYB AGXs for 1G AWDs (and theoretically FWDs) work on CSMs. No such luck on the rears though.
1g FWD and AWD and GVR4 struts are the same in the front. As for them working on a CSM, they will bolt up, but they're not an exact match. It will change the ride height of the car, most likely raise it up.
The fronts work perfectly. If they do alter the height, it can't be by much. The rears on the other hand, make the back of the car look DUMPED.
I have 1G AWD AGXs on the front of my car, and for like 5 minutes, I had them on the back as well. The rear of the car was too low, so I swapped them out for GR2s made for the CSM. But front 1G AWD shocks are a direct bolt on to our cars.
Both pics have the same springs on the car (Tenzo-R GF2s for a 1G AWD)
My car with 1G AWD AGXs up front and CSM GR2s in the rear:
My car with 1G AWD AGXs front and rear:
Register
Login
Forum
Gallery
FAQ
