| 4g61t.org http://www.4g61t.org/forum/ |
|
| Best size slipstreams for 8.5" slicks http://www.4g61t.org/forum/viewtopic.php?f=22&t=29758 |
Page 1 of 1 |
| Author: | Brent Kuz [ Sun Jun 21, 2009 1:24 pm ] |
| Post subject: | Best size slipstreams for 8.5" slicks |
Looking for some good cheapo wheels for my M&H 23x8.5x15 slicks. Just looking for a good cheap wheel. Anyone have suggestions and links so I can buy them? Also for good open faced lug nuts. Updated see bottom. |
|
| Author: | dan [ Sun Jun 21, 2009 2:56 pm ] |
| Post subject: | Re: Good cheapo rims for slicks? |
rota slipstreams are pretty damn cheap. |
|
| Author: | Brent Kuz [ Sun Jun 21, 2009 4:35 pm ] |
| Post subject: | Re: Good cheapo rims for slicks? |
I was thinking like a cheapo steelie type wheel. |
|
| Author: | Brent Kuz [ Sun Jun 21, 2009 5:44 pm ] |
| Post subject: | Re: Good cheapo rims for slicks? |
Also what offset should I get for slicks? |
|
| Author: | 1japdsm [ Mon Jun 22, 2009 12:51 am ] |
| Post subject: | Re: Good cheapo rims for slicks? |
http://www.diamondracingwheels.com/ |
|
| Author: | vehicular [ Mon Jun 22, 2009 1:04 pm ] |
| Post subject: | Re: Good cheapo rims for slicks? |
I like these with 20x8-13 M&H's when I can fit them over the brakes. http://summitracing.com/parts/AEO-31084540/ I have GVR4 brakes on my car, so I'd probably go with these: http://summitracing.com/parts/GWM-93-580039P/ They're ugly, and you'll have to buy shank type lugs, but they're cheap and strong. |
|
| Author: | Turbogt [ Mon Jun 22, 2009 1:10 pm ] |
| Post subject: | Re: Good cheapo rims for slicks? |
Quote:
What i was going to say. |
|
| Author: | Brent Kuz [ Tue Jun 23, 2009 4:02 pm ] |
| Post subject: | Re: Best size slipstreams for 8.5" slicks |
Changed my mind to a rota slipstream wheel for the slicks should I go with 15x7 +40 off set or 15x7.5 +48 |
|
| Author: | CaptainTonus [ Tue Jun 23, 2009 4:37 pm ] |
| Post subject: | Re: Best size slipstreams for 8.5" slicks |
Go with 15x7 +40 offset, it will fit the car better and you'll have less rubbing issues on those slicks. You may need spacers though either way, because 8.5" is pretty wide. |
|
| Author: | dsmcolt969 [ Tue Jun 23, 2009 9:21 pm ] |
| Post subject: | Re: Best size slipstreams for 8.5" slicks |
when I lowered mine about 1.5 inches the 2255015 with are roughly 24x9 it rubbed on the inner fender soo with the 15x7 and a 40 offset should work out good |
|
| Author: | Brent Kuz [ Tue Jun 23, 2009 10:39 pm ] |
| Post subject: | Re: Best size slipstreams for 8.5" slicks |
I am thinking they should be good with the +40 offset. Thank you guys! Anyone know a good rota vendor? |
|
| Author: | MR HYDE [ Wed Jun 24, 2009 8:27 am ] |
| Post subject: | Re: Best size slipstreams for 8.5" slicks |
wheeldude.com machiii.net Quote: I am thinking they should be good with the +40 offset. Thank you guys!
Anyone know a good rota vendor? |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|