4g61t.org http://www.4g61t.org/forum/ |
|
Another Super Pro order http://www.4g61t.org/forum/viewtopic.php?f=22&t=29555 |
Page 1 of 3 |
Author: | oil-burner [ Wed Jun 03, 2009 10:09 pm ] |
Post subject: | Another Super Pro order |
If enough intrest is shown, I will place another order for Super Pro bushings. Some of you have been on the list fo turbo/elantra sway bar bushings, 2 sets have been shipped withe the other 8 on route to me as we speak. Below is a list & pricing for all the bushings offered by Super Pro, to fit the 89/92 C/S/M's Front lower control arm front bushing (csm control arm) $34.50 ![]() Front lower control arm rear bushing (csm control arm) $95.00 ![]() Front swaybar to frame bushings (turbo/elantra) $15.00 ![]() Rear panhard rod $20.00 ![]() For those who have Elantra front control arms Front lower control arm front bushing $44.00 ![]() Front lower control arm rear bushing $45.00 ![]() Another option on the rear bushing for the front control arm is, the bushings are offered to increase or decrease caster. they are avalible for both csm & elantra control arms Since the bushings are from across the big pond, we are looking about 6/8 weeks for delivery. Prices are for the set of bushings, and shipping will only be from me to you let me know, scot |
Author: | CaptainTonus [ Thu Jun 04, 2009 12:59 am ] |
Post subject: | Re: Another Super Pro order |
I am 100% up for this. I want all the bushings possible for a factory turbo CSM. Paypal ready, just let me know. |
Author: | UnderPSI [ Thu Jun 04, 2009 3:32 am ] |
Post subject: | Re: Another Super Pro order |
Wow this a great contribution to the CSM community, I commend you. Now I need to come up with the funds to get the rest of the bushings! ![]() |
Author: | MattGSR [ Thu Jun 04, 2009 6:13 am ] |
Post subject: | Re: Another Super Pro order |
count me in for sure, i was going to order these anyway might as well order in bulk i have paypal ready just say when, thanks |
Author: | Mechacode [ Thu Jun 04, 2009 3:45 pm ] |
Post subject: | Re: Another Super Pro order |
Front lower control arm bushings: Would we need 2 kits to do both sides or is there enough to do both sides in one kit? Either way, count me in again. |
Author: | oil-burner [ Thu Jun 04, 2009 4:40 pm ] |
Post subject: | Re: Another Super Pro order |
Quote: Front lower control arm bushings:
No, one part number will do both control arms.Would we need 2 kits to do both sides or is there enough to do both sides in one kit? Either way, count me in again. scot |
Author: | MattGSR [ Thu Jun 04, 2009 6:26 pm ] |
Post subject: | Re: Another Super Pro order |
I think we need 2 of the panhard rod bushings though right? |
Author: | Goat_Boy [ Thu Jun 04, 2009 10:32 pm ] |
Post subject: | Re: Another Super Pro order |
I also want the whole kit |
Author: | LILEVO [ Fri Jun 05, 2009 1:22 am ] |
Post subject: | Re: Another Super Pro order |
I will take the front and rear front lower control arm bushing sets. My rear bushing looks like the 1140K, not the 1714K. Not sure if that picture is in the wrong spot or what http://lilevo.com/lilevo2/suspension/LCAbushing.JPG |
Author: | Coltsfan [ Fri Jun 05, 2009 12:13 pm ] |
Post subject: | Re: Another Super Pro order |
I need the frame bushings for the front sway bar, and both sets of front control arm bushings. I have a 90 Colt hatch, so I think I need the 1140K and 1160K I would like them in the standard size because my camber is fine. Thank you! |
Author: | Devolution [ Fri Jun 05, 2009 12:28 pm ] |
Post subject: | Re: Another Super Pro order |
Quote: I will take the front and rear front lower control arm bushing sets.
1714K is listed as "CB GSR Only" in the SuperPro catalog, so those are for the Turbo/GSR control arms, whereas 1140K is listed as "Not GSR" so they're for the 4G15/non-turbo/non-GSR cars(obviously).
My rear bushing looks like the 1140K, not the 1714K. Not sure if that picture is in the wrong spot or what http://lilevo.com/lilevo2/suspension/LCAbushing.JPG |
Author: | LILEVO [ Fri Jun 05, 2009 1:19 pm ] |
Post subject: | Re: Another Super Pro order |
Put me down for 1160K 1140K |
Author: | ScottSpecV [ Wed Jun 17, 2009 5:23 pm ] |
Post subject: | Re: Another Super Pro order |
I'm down for a set of swaybar bushings. |
Author: | 92 gsr-4 [ Thu Aug 06, 2009 1:02 pm ] |
Post subject: | Re: Another Super Pro order |
Put me down for everything for a 89 turbo mirage. Do they sell any bushings for the rear suspension? |
Author: | CaptainTonus [ Thu Aug 06, 2009 1:21 pm ] |
Post subject: | Re: Another Super Pro order |
I'd like to know if there is any status on this. I'm still interested. |
Page 1 of 3 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |