4g61t.org http://www.4g61t.org/forum/ |
|
SuperPro bushings: Order here! http://www.4g61t.org/forum/viewtopic.php?f=22&t=25870 |
Page 2 of 7 |
Author: | stealthtt24 [ Mon Aug 04, 2008 9:58 pm ] |
Post subject: | |
So we can just call Tein USA to ask about sway bar bushings and they will know what im talking about? Def. didnt want to call Austrailia... |
Author: | Berserko [ Mon Aug 04, 2008 10:02 pm ] |
Post subject: | |
apparently.... http://www.tein.com/products/superpro.html |
Author: | MattGSR [ Tue Aug 05, 2008 1:26 am ] |
Post subject: | |
holy crap nice! im calling them tomorrow and ordering, thanks berserko! |
Author: | stealthtt24 [ Sun Aug 10, 2008 11:11 am ] |
Post subject: | |
Called one of the reps for tein (local shop) and got a dead end on sway bar bushings... |
Author: | sketzshane [ Mon May 11, 2009 7:28 am ] |
Post subject: | Re: SuperPro bushings: Order here! |
What bushings are available? I would like to buy bushings from my sway bar, my 2 control arms and trailing arms. |
Author: | Lusion972 [ Mon Aug 17, 2009 4:53 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
I just called Jotech racing and he had the catalog but he has never had to order anything from them before so I gave him the part numbers and he said he would call me back with the price. |
Author: | Phlipfreq [ Thu Nov 12, 2009 12:34 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
I email whiteline. Got in contact with a Grant Atkin. He sent me something showing that they carry 19mm sway bar bushings, but thats about it. |
Author: | Phlipfreq [ Fri Nov 13, 2009 1:55 am ] |
Post subject: | Re: SuperPro bushings: Order here! |
If your car is an RC, RD, or RE model these will fit. Are any of those our car? |
Author: | Flying Eagle [ Sun Jan 03, 2010 6:45 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
No, our cars are "2000" series, or C5X/6X/7X/8X models from 87 overseas (89 here) to 94ish overseas (92 here). Also known as CB Lancers/Mirage IIRC, as CC is the Evo 1 style, and COA follows that. C53a turbo sway bar bushings are 20mm, c52a (1.5L) sway bar bushings are 15mm on these shores. I am pretty sure that the overseas models correspond to that, as even the rear drive models don't use an independent rear suspension so no sway bar. |
Author: | Barnes 61T [ Sun Aug 08, 2010 11:56 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
does anyone make a kit that replaces all of the suspension bushings? my needs about everything, Mirage turbo c53a. thanks |
Author: | CaptainTonus [ Mon Aug 09, 2010 10:44 am ] |
Post subject: | Re: SuperPro bushings: Order here! |
Quote: does anyone make a kit that replaces all of the suspension bushings? my needs about everything, Mirage turbo c53a. thanks
Nope.
|
Author: | Flying Eagle [ Tue Aug 10, 2010 9:32 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
You can replace just about every bushing for suspension with Superpro stuff, but I'm not sure all of it can be. Best place to ask, is with our off-shore buddies from NZ and AUS. http://www.gsrcyborgclub.com/ http://www.4g61nz.co.nz |
Author: | clay [ Wed Aug 11, 2010 4:12 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
i might be able to get these, what part numbers are for the 1989 Turbo Cars? I will just buy a few sets and hang on to them and you guys can let me know if you need them and wont have to wait the 2-3 weeks or whatever it is again. post the part numbers for the 89 turbo colt/mirage and ill get some on the way thanks Clay |
Author: | LILEVO [ Wed Aug 11, 2010 4:32 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
Ugh. We went thru this like 3 times already. Find the thread with who wanted what part numbers and go from there. I still want my request |
Author: | clay [ Wed Aug 11, 2010 4:38 pm ] |
Post subject: | Re: SuperPro bushings: Order here! |
Quote: Ugh. We went thru this like 3 times already. Find the thread with who wanted what part numbers and go from there. I still want my request
Sorry lilevo i didnt mean to earn an "ugh" lolI work in the industry and im pretty sure i can get ahold of these, and ill front the money to buy a few sets up front so that when people need them they can just get them from me. I just want to get a solid ironed out list of part numbers before i send the PO. ill try searching around some more but if anyone wants to make this easier, i think this would be the pertinent thread to post it in. |
Page 2 of 7 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |