4g61t.org
http://www.4g61t.org/forum/

SuperPro bushings: Order here!
http://www.4g61t.org/forum/viewtopic.php?f=22&t=25870
Page 1 of 7

Author:  LILEVO [ Thu Jul 24, 2008 6:50 pm ]
Post subject:  SuperPro bushings: Order here!

I got a hold of Jesse at Revolution Motorsports.

He can get us super pro bushings from Australia. They will take 2-3 months to get here (which is fine with me)

If you want some, tell me which part numbers you want. I will then tell you the total cost to paypal me.

I am getting:

SPF1160K
SPF1140K

Which are really the only two control arm bushings available for the 1990.

Author:  89coltgt [ Thu Jul 24, 2008 8:21 pm ]
Post subject: 

Is this a special order through Jesse?

Author:  CaptainTonus [ Thu Jul 24, 2008 8:24 pm ]
Post subject: 

PM sent.

Does SuperPro have an all-inclusive kit for a C53?

Author:  LILEVO [ Thu Jul 24, 2008 8:31 pm ]
Post subject: 

Well he is ordering them. Nothing much more "special" about it. I can't just call up superpro and order them myself.

Author:  Berserko [ Fri Jul 25, 2008 1:27 am ]
Post subject: 

Or you can call whiteline and they can be here in 2-3 weeks...

Author:  MattGSR [ Fri Jul 25, 2008 1:43 am ]
Post subject: 

I'm in, these are the bushings i need.

SPF1160K
SPF1140K
SPF2092B-4K
SPF0427K (i need 2 of these please)

let me know how much, where and when to send payment. thanks Jason

Author:  stealthtt24 [ Mon Aug 04, 2008 7:16 pm ]
Post subject: 

What ones are the sway bar to chassis bushings?

Author:  LILEVO [ Mon Aug 04, 2008 7:39 pm ]
Post subject: 

I think he said the 1160 is $50 and the 1140 is $40. Might be flipped.

Beserko, I looked on the whiteline site and couldn't find any bushings. Do you have someone you dealt with in the past?

Author:  Berserko [ Mon Aug 04, 2008 8:11 pm ]
Post subject: 

I just called and ordered and they sent them...

Author:  stealthtt24 [ Mon Aug 04, 2008 8:12 pm ]
Post subject: 

What number did you call?

Author:  Berserko [ Mon Aug 04, 2008 8:40 pm ]
Post subject: 

Quote:
What number did you call?
http://www.whiteline.com.au/location.htm

How to Contact Us
LOCATION:
4 Warringah Close, Somersby. 2250
NSW. Australia
Google Map

PHONE:
(02) 4340 2355
1300 88 2355
int+ 61 2 4340 2355 (international)

FAX:
(02) 4340 2466

ORDERING METHODS:
Our products can be purchased via our secure Webstore (credit card only)

HOURS:
Normal opening hours (Australian Eastern Standard time):
Monday to Friday - 8.00am to 5.00pm

Author:  LILEVO [ Mon Aug 04, 2008 8:46 pm ]
Post subject: 

For 89-92 Lancer, this is all I see:

F Brace-strut tower alloy adj KSB556
F Camber adj bolt kit-12mm KCA412 +/- 1.5 deg
F Caster adj kit - control arm. excl GSR KCA323 adds +1.0 deg
F Spring-coil lowering kit - Control 70082
R Panhard rod kit-adjustable KPR013 off-car adjustable
R Spring-coil lowering kit - Control 79118
R Swaybar-h/duty Blade adjustable. CB sedan coupe with beam rear BMR68Z
R Swaybar-heavy duty. CB sedan coupe with beam rear BMR68

Author:  stealthtt24 [ Mon Aug 04, 2008 8:48 pm ]
Post subject: 

Im looking at Hyundai Elantras, since i'm using the same sway bar.

Author:  Berserko [ Mon Aug 04, 2008 9:39 pm ]
Post subject: 

Trust me I've ordered from them twice you just need to call them....

Author:  Berserko [ Mon Aug 04, 2008 9:44 pm ]
Post subject: 

Supposedly Tien USA is the distributor for SuperPro in the USA now...

Page 1 of 7 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/