4g61t.org
http://www.4g61t.org/forum/

Shift linkage!
http://www.4g61t.org/forum/viewtopic.php?f=2&t=11769
Page 2 of 2

Author:  bd mitsu [ Wed Nov 24, 2004 12:55 am ]
Post subject: 

i left every thing as is the cables are from a 1.5 89 colt 4 speed and the tranny is from a 90 eclipse and to make note where you bolt the linkageon the trannyor excuse me the shifter cable bracket i only used one screw to mount not two .. icantake pics if needed

Author:  Geo2g [ Wed Nov 24, 2004 10:01 pm ]
Post subject: 

I purchased the part today from Home Dept for $1.26. Works beautiful!! Now the person that had the car before me tried to weld the selector arm some kind of way and the selector arm broke off. He didn't know about the 2inch extension needed. Which selector are you using. Keep in mind that I have a 4g63t motor&tranny swap in a 1.6T body. Im looking for a selector I just don't know which oneis needed. You have been a great help BD Mitsu.

Author:  bd mitsu [ Thu Nov 25, 2004 10:42 pm ]
Post subject: 

i had a 1.5 4-spped colt swapped with a 90 eclipse turbo tranny and engine. changed nothing the cables are factory for the vehicle

Author:  waxie1 [ Wed Sep 14, 2005 11:31 pm ]
Post subject: 

Bd Mitsu, could you please send me the pictures of the 1G Km210 turnbuckle shift lever option... Thanks!!!!

waxie1@hotmail.com

Author:  bd mitsu [ Sat Sep 17, 2005 1:06 pm ]
Post subject: 

And for all that would need this... ive doone the digging.. found the dvd.. and here it is :finga:

Image
Image
Image
Image

Author:  bfrontin [ Mon Sep 19, 2005 7:08 am ]
Post subject: 

^^^^^


THA'S THE $HIT RIGHT THERE!!!

would have NEVER thought bout that option..makes complete sense!

now..what is the CORRECT name for it (the part) and is there a specific size to ask for?

hardware part?

:-?

Author:  bfrontin [ Tue Sep 27, 2005 6:59 am ]
Post subject: 

ok..i am gettin some turn buckles but they were too small (threading)

can someone confirm the thread/bolt size please. and if a 3" turnbuckle will work..the 2" is too small.

thanks

8)

Author:  Flying Eagle [ Tue Sep 27, 2005 8:26 pm ]
Post subject: 

Get a small block of aluminum and tap it with normal thread direction and pitch on one side to match the cable's bolt threads and do reverse threading on the other side; this way you can make it any size you want. :o 8)

Author:  Berserko [ Tue Sep 27, 2005 8:32 pm ]
Post subject: 

BD,

I'll host that linkage pic for you email it to berserko@heckatomb.com

Author:  89Mirageman [ Tue Sep 27, 2005 11:28 pm ]
Post subject: 

So this mod enables you to use the stock shifter cables for the 1.5 tranny correct? Also you don't have to change out the shift levers in the tranny or whatever they are called? If so I vote we move this to the archives!

Author:  Flying Eagle [ Fri Jan 08, 2010 10:34 pm ]
Post subject:  Re: Shift linkage!

Added the pics back to the archives for now.

Image

Image

Image

Image

Page 2 of 2 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/