4g61t.org

Specializing in the 3g CSM
It is currently Tue Mar 19, 2024 5:25 am

All times are UTC-05:00




Post new topic  Reply to topic  [ 16 posts ]  Go to page 1 2 Next
Author Message
PostPosted: Mon Aug 31, 2009 12:11 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
I just wanted to say I got it going took me away but I got it done saturday morning been out tuning alot and as of right now it's runing 24ish psi. It full spools right around 6000rpms. I am runing stock block stock head and stock cams. I have the dsmlink My rev limit is 8000rpms mod list is

91 Eagle talon TSI AWD
stock motor (arp head studs and stock mitsu gasket)
Dogbox racing built tranny(double sycro 1st and 2nd evo3 3rd and 4th gear
act2600 (street disc)
Bosch 044 pump in tank.
6an feed line stock return
aermotive fpr
Ford 1660cc injs
FRH intake mainfold
Huge air to water ic (redrums setup)
Garret GT4202 .98 AR (redrums setup)
Revhard T4 mainfold
knock off HKS Gt2 60mm wastegate
knock off tial bov


Thats pretty much the hole setp I will try to get some pics uploaded later today I am just glad I got it going thought I would share the joy on the site.


Tyler,


Top
   
PostPosted: Mon Aug 31, 2009 12:17 pm 
Offline
2nd Banana
User avatar

Joined: Wed Dec 28, 2005 1:16 pm
Posts: 9369
Location: San Diego, CA.
Why would you build a setup like that for a stock bottom-end? I also really hope you're planning to upgrade your cams. An 8,000rpm rev limit is nowhere near high enough for a turbo like that, and you're gonna need to run a LOT of boost to keep that turbo happy. Good luck.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus


Top
   
PostPosted: Mon Aug 31, 2009 12:33 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
Why I have a motor I am building it is just not done yet R&R alum rods and Wiseco 9 to 1 HD pistons. Along with kiggleys block gridle. I am on E85 I forgot to say that. I think befor I do any swap out of the motor I wanna take it to the dyno and see what I can make on the stock block.
Image

Image

Image

Image

Image

Image
this is just a few pics of the sending unit I am uploading the rest of the pics now


Top
   
PostPosted: Mon Aug 31, 2009 1:04 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image


Top
   
PostPosted: Mon Aug 31, 2009 1:22 pm 
Offline
2nd Banana
User avatar

Joined: Wed Dec 28, 2005 1:16 pm
Posts: 9369
Location: San Diego, CA.
Well, you'll certainly be able to test the limits of the stock 4G63 on those parts. Have fun, and take videos.

_________________
91 GSX - 511fwhp and 352 lb/ft 25psi 110 octane, 7.68 @ 95.9mph 1/8th 21psi 91 octane, 11.93 @ 112.9mph, 117.7mph best trap speed, 20psi 91 octane
98 Volvo S70 T5 - DD

http://www.facebook.com/captaintonus


Top
   
PostPosted: Mon Aug 31, 2009 3:20 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
thats for sure and I am going to just keep pushing it till it lets go. I have brian crower springs and retainers along with some cams I might put in the car the next time I tare it back apart the car feels awsome at that boost level as soon as it hit's I can't compare it to any other turbo car that I have road in so far. I am sprized I am geting full spool right around 6k. I am guessing the stock cams might be helping me there or hurting me idk..


Tyler,


Top
   
PostPosted: Mon Aug 31, 2009 3:24 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
btw does anyone have the right up to port the oil housing to lower oil pressurer. as I think i might be pusing oil throo the oil seals of the turbo as I do have some smoke when I left off. and I get some high oil pressure at highend..


Tyler,.


Top
   
PostPosted: Mon Aug 31, 2009 4:27 pm 
Offline
Member
User avatar

Joined: Fri Apr 03, 2009 11:03 am
Posts: 120
Location: NY; L.I.; (631)
Do you have an oil pressure guage/reading?

Keep up the good work with posting pics... best luck; skill. This thread might get more play in the Members/Members Rides section...?

P.S. What is with DSMs and annodized purple?

Kanpai,
#89

_________________
#89


Top
   
PostPosted: Mon Aug 31, 2009 4:49 pm 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
redrum123 had it done. I am just going with the flow no need to mess up what he did. I also just wanna know how to port the oil releaf or if some one could give me a link to a write up on how to. and if some one wants to move the link to there then I wouldnt mind if that would be a better place for it.


Top
   
PostPosted: Wed Sep 02, 2009 11:27 am 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
I am going to try tot ake it to the track this weekend. I am haveing a few problems it brakes up under boost unless I atleast have the air fuels to a lean 12.0 which I know is not to bad but I do not see why it miss so bad runing richer then that.


Top
   
PostPosted: Wed Sep 02, 2009 1:54 pm 
Offline
Some call me a god

Joined: Mon Sep 24, 2007 5:50 pm
Posts: 1219
Location: Htown, TX
Your running an oil restrictor with that turbo I hope. If not your going to blow those seals real quick.


Top
   
PostPosted: Thu Sep 03, 2009 8:44 am 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
yes there is one. No big deal. I am not sure what size it is redrum123 I bought the hole setup from ..

Tyler,


Top
   
PostPosted: Thu Sep 03, 2009 8:48 am 
Offline
Spends Too Much Time Under The Hood

Joined: Fri Sep 05, 2008 11:55 pm
Posts: 244
Location: Montezuma IN.
I am also going to look at a 92 Laser shell tmrw. It's alot cleaner I plan to keep this car and do somthing with it but as far as what I don't know yet.


Top
   
PostPosted: Sun Sep 13, 2009 1:14 pm 
Offline
Member

Joined: Tue Aug 25, 2009 7:58 pm
Posts: 51
Location: roseville, mi
stock blocks can take alot more than you think.
here is my friends car from another forum.
434awhp stock block
http://www.xceedspeed.com/forums/showth ... p?t=139978


Top
   
PostPosted: Sun Sep 13, 2009 1:27 pm 
Offline
CSM Expert
User avatar

Joined: Sat Nov 03, 2001 7:00 pm
Posts: 2187
If you have a restrictor then it doesn't matter how high your oil pressure is, it will restrict it.


Top
   
Display posts from previous:  Sort by  
Post new topic  Reply to topic  [ 16 posts ]  Go to page 1 2 Next

All times are UTC-05:00


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Limited