| 4g61t.org http://www.4g61t.org/forum/ |
|
| where is the o2 sensor and the coolant temp sensor-4g15 SOHC http://www.4g61t.org/forum/viewtopic.php?f=17&t=6053 |
Page 1 of 1 |
| Author: | donmega [ Fri Nov 07, 2003 6:55 pm ] |
| Post subject: | where is the o2 sensor and the coolant temp sensor-4g15 SOHC |
im rplacing both and cant get my hands on a manual so a little guidance would be helpful thanks in advance |
|
| Author: | X2T [ Fri Nov 07, 2003 8:04 pm ] |
| Post subject: | |
This info is regarding 8v version - 12v may be different. O2 sensor is threaded into the lower part of the exhaust manifold. Some newer cars might have an additional one near the cat. Be sure to saturate it w/penetrating oil(PB blaster,wd40,etc) before attacking it. On my 8v 4G15, the temp sensor is threaded into the intake manifold near the t-stat cover. Torque recomendations for O2 sensor is 33ft lbs and for the coolant sensor 19ft lbs. |
|
| Author: | socrateez [ Fri Nov 07, 2003 11:18 pm ] |
| Post subject: | |
Be advised that the O2 sensor can be extremely difficult to remove! |
|
| Page 1 of 1 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|