I have an 89 1.5L
(X) and it is running very bad. Check engine light is on as expected.
I hooked up the TMO to find that:
*
ECU ID is 1.8L – E019
* ECU Errors- there are 5 of them
12-Air Flow Sensor
13 Air Temp Sensor
15 Coolant Temp Sensor = (-62*)
25 Barometric Pressure Sensor = 1.24Bar
*Battery = 18.7v // Tested at Battery terminals = 13.6Vdc
*TPS = 100%
*O2 Sensor = 4.98Vdc
Okay, so likely someone tossed a 1.8L ECU in to get it to run, when I get home tonight I will pull the panel to see what I have.
I do have a ECU from a 94 1.5L(A), is it possible to swap some pins at the ECU and use it or do I have to purchase one of the 1.5L(X) ECUs avialable.
According to the list at the link I am posting there are other versions/model numbers available.
This could be very useful in the future check it out:
http://missourimitsu.com/ar/t2105.htm
Thanks,
Joe