4g61t.org http://www.4g61t.org/forum/ |
|
Soon to be 4G63 http://www.4g61t.org/forum/viewtopic.php?f=16&t=36405 |
Page 1 of 3 |
Author: | 87mirageturbo [ Wed May 09, 2012 10:11 pm ] |
Post subject: | Soon to be 4G63 |
So as some of you have seen I have been asking alot of questions about the c10 4g63 swap. Well..... The time to swap is coming up. I will be trying todo a kinda step by step how to swap, already with the help from a few of you. I already would like to say thanks to deco_will_fly for the motor mounts, he was nice enough to send them up to me. I also wanna say thanks to miragesist for alot of ongoing help with the wiring. I will be getting pictures up as I get them. So to start the platform is an 87 mirage turbo with 99k original miles from the original owner. The motor is out of my late 92 Galant VR4(RIP). The motor: 6bolt full Eagle bottom end head port and polished 5 way valve grind w/3mm oversized valves BC 264 cams 2nd Gen ported turbo mani Evo 3 16g Evo 3 O2 ported Balance shaft removed Egr deleted Delete on all emissions crap rc engineering 880cc injectors 2nd Gen tb elbow 2nd Gen mass w/dejon hard pipe turbo inlet DSM link v2 apexi safc2 (for monitoring) Turbo xs 2stage boost controller probably more that I am forgetting. Needless to say I am excited for this awesome power to weight ratio i will post more as I go along with the build . If there is anyone that has done this swap and has tips please share lol Thanks everyone and happy motoring |
Author: | getboosted [ Thu May 10, 2012 6:53 am ] |
Post subject: | Re: Soon to be 4G63 |
It is great that you are doing the swap! Please do list the parts needed for the swap as you do the step by step how to with pictures. Thank you for sharing!!! ____________ |
Author: | 87mirageturbo [ Thu May 10, 2012 9:21 am ] |
Post subject: | Re: Soon to be 4G63 |
here is some pics of parts and stuff Of course the beast |
Author: | Ninjaneonturtle [ Fri May 11, 2012 12:13 am ] |
Post subject: | Re: Soon to be 4G63 |
Please keep a post with updates, I'd be very interested. Especially about the wiring, splicing the harnesses. Also, what cluster do you plan to use? The original Mirage turbo cluster? DSM? 3rd gen CSM? I'm far from swapping mine, (not a turbo, but bought it and maintained it from 17k miles) funding and have to prep the body to last and look good before i drop anything in it. I have a turbo Mirage cluster in the car right now, plug and play. Everything works except the boost gauge obviously, but it would be nice to retain the stock cluster. |
Author: | miragesist [ Fri May 11, 2012 10:45 pm ] |
Post subject: | Re: Soon to be 4G63 |
dude ,, where did yiu get that radiator? what car and year? im looking for one them |
Author: | Ninjaneonturtle [ Sun May 13, 2012 9:57 pm ] |
Post subject: | Re: Soon to be 4G63 |
Looks like a civic half rad? The one in my C10 is a half radiator though. |
Author: | 87mirageturbo [ Mon May 14, 2012 1:57 pm ] |
Post subject: | Re: Soon to be 4G63 |
Radiator is a Honda civic pretty much anyone from the 90's. Mine is for a 99 SI specifically cause it had a dohc instead of a single slammer. I plan on using the stock cluster and plan on having everything work on it even though i have other gauges to monitor boost and whatever else i might need. So far with the wiring I am planning on building my own swap connector probably a week before I pull the motor that way all I gotta do after I pull the engine is plug itt in and go. I will be doing the swap in a weekend do to the car being my daily driver. I will keep everyone updated as I go. |
Author: | 87mirageturbo [ Tue May 22, 2012 9:13 am ] |
Post subject: | Re: Soon to be 4G63 |
I got a couple more pics for you two of my mirage and the last one is my plug and play swap harness that I am pre-wiring to make the swap go that much easier let me know what you guys think! |
Author: | Ninjaneonturtle [ Fri May 25, 2012 1:54 am ] |
Post subject: | Re: Soon to be 4G63 |
Quote: My real question is how did you lower your Mirage?! I've been dying to lower my Colt.. |
Author: | miragesist [ Sat Jun 30, 2012 9:19 pm ] |
Post subject: | Re: Soon to be 4G63 |
hey buddy hope you are doing good, any update? |
Author: | king_of_the_street [ Tue Jul 03, 2012 9:38 pm ] |
Post subject: | Re: Soon to be 4G63 |
Love the older body styles! .. Hope it all goes smoothly |
Author: | getboosted [ Wed Jul 25, 2012 9:30 am ] |
Post subject: | Re: Soon to be 4G63 |
Please update us on your progress and more pictures. Hope everything is going well for you! ____________ |
Author: | drcolt2000 [ Fri Aug 10, 2012 1:47 pm ] |
Post subject: | Re: Soon to be 4G63 |
I like those pics. R the rims on there fron the premier sedan model. Kinda looks it. I luv the c10 body. Thumbs up. |
Author: | 87mirageturbo [ Sat Sep 08, 2012 9:40 am ] |
Post subject: | Re: Soon to be 4G63 |
So the day has come!!! I drove her for the last time with the g32 lastnight to the guys house in which we are doing it at. I had the machine shop remove the balance shafts for me and put some new block plugs in it for me(410 machine in Buckley, WA would reccomend for DSMs!). I am grabbing the engine/ trans from the machine shop on my lunch break and running it over to the house so I can get started on it tonight. I will try and take as many pictures as I can and keep you guys updated on whats going on and what I run into along the way. |
Author: | 87mirageturbo [ Sat Sep 08, 2012 9:45 am ] |
Post subject: | Re: Soon to be 4G63 |
Quote: Quote: My real question is how did you lower your Mirage?! I've been dying to lower my Colt.. |
Page 1 of 3 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |