4g61t.org http://www.4g61t.org/forum/ |
|
AWD Colt Vista 4G63T Build.... http://www.4g61t.org/forum/viewtopic.php?f=100&t=34927 |
Page 6 of 10 |
Author: | dan [ Thu Dec 15, 2011 11:22 am ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Micah was nice enough to let me take the car to work today. It runs amazing well for 10psi and 3-minute butt tune. Still have clutch issues and probably trans (grinds sometimes). Once that is figured out we'll up the boost and go tune it at RRE. |
Author: | micah [ Thu Dec 15, 2011 11:50 am ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
dan was nice enough to help me w/ the build and tune. anxious to hear what the coworkers think. i can only imagine... |
Author: | boostfreak [ Thu Dec 15, 2011 2:47 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
You guys did an auto-manual swap correct? What trans is in the car now? stock final/rear end ratio same as DSM? |
Author: | dan [ Thu Dec 15, 2011 2:53 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Quote: You guys did an auto-manual swap correct? What trans is in the car now?
Complete 1G AWD 5spd drive train. It was an auto car previously.
stock final/rear end ratio same as DSM? |
Author: | CSM Shaun [ Thu Dec 15, 2011 4:13 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
I am so close to doing this to my van. If I have to drop that heavy ass AWD automatic again it will probably not be going back in. |
Author: | boostfreak [ Thu Dec 15, 2011 6:07 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Quote: Quote: You guys did an auto-manual swap correct? What trans is in the car now?
Complete 1G AWD 5spd drive train. It was an auto car previously.stock final/rear end ratio same as DSM? Do you know what the stock 5 speed front diff final and rear end ratios are? |
Author: | CSM Shaun [ Thu Dec 15, 2011 6:14 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Engrish! |
Author: | boostfreak [ Fri Dec 16, 2011 9:48 am ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Fixed lol |
Author: | CSM Shaun [ Fri Dec 16, 2011 11:00 am ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
For the van or for the 1g stuff? |
Author: | boostfreak [ Fri Dec 16, 2011 4:05 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Stock 5 speed Van ratios.... |
Author: | pimpy rider [ Sat Dec 17, 2011 12:08 am ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
1993 5 speed awd vans are identical trans as 2g awd dsm, aside from the vc unit and housing to support it. (easily swapped out to make full dsm trans) t case is same as 92-on and rear diff ratio is the same. All you need with an awd van is a dsm engine and 1 motor mount. Its a super easy swap. But if you do what micah did then not so much. This swap was a hell of a lot more work than mine. I dont know but i would bet the auto awd trans is borrowed from dsm too? and rear diff would also be sameratio as auto dsm? I just wish they would have used a dsm rear diff so a guy could swap in an lsd unit easily. |
Author: | boostfreak [ Sat Dec 17, 2011 1:47 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Quote: 1993 5 speed awd vans are identical trans as 2g awd dsm, aside from the vc unit and housing to support it. (easily swapped out to make full dsm trans) t case is same as 92-on and rear diff ratio is the same. All you need with an awd van is a dsm engine and 1 motor mount. Its a super easy swap. But if you do what micah did then not so much. This swap was a hell of a lot more work than mine.
I dont know but i would bet the auto awd trans is borrowed from dsm too? and rear diff would also be sameratio as auto dsm? I just wish they would have used a dsm rear diff so a guy could swap in an lsd unit easily. Great info- As far as the diff, as long as the width is about the same, I bet the outer splines would be as well! |
Author: | omertaitalia [ Sun Dec 18, 2011 4:09 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
i just started on my mitsubishi expo 7 passenger van, pulled the motor, I'm waiting on a couple gaskets and i still need to tap my intake manifold for my map sensor(running sd) then ill be dropping in a fresh fully built motor. awesome work though any updates? |
Author: | 89Mirageman [ Sun Jan 15, 2012 12:39 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
Sorry if I missed it but what did you guys use for the trans mount on the frame rail? |
Author: | omertaitalia [ Sun Jan 15, 2012 1:37 pm ] |
Post subject: | Re: AWD Colt Vista 4G63T Build.... |
i swapped the mounts from the summit to the 2.0 it all bolted up, mine was originally manual and awd. |
Page 6 of 10 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |