4g61t.org http://www.4g61t.org/forum/ |
|
Brake Guide http://www.4g61t.org/forum/viewtopic.php?f=10&t=7 |
Page 1 of 1 |
Author: | Flying Eagle [ Mon Mar 05, 2007 3:53 pm ] |
Post subject: | |
ColtMAX wrote: Quote: After browsing the archives i came to the conclusion that we do not have anough information on brakes for the C53A Mirage/Colt.
So here are my findings: Rotors Brembo Oem Replacement FR: 25341 RR: 25165 Pads Hawk HP + Pads FR: H213H.626 RR: N/A Stainless Steel Brake Line Kit Goodridge G-Stop 4 corners: 26043 **If you have other brands and part numbers please post them and I will update this list. Quote:
Updated by the site admin circa 2002.
The stock brake pad codes are Front: D328 and Rear: D329. These are federal assigned codes given to the pads that are used by all manufacturers. You can use the code to cross reference pads at different companies. [b:bsk70jmr]Upgraded Pads[/b:bsk70jmr] You can purchase Axxis Metal Master pads from most brake pad suppliers. You can also have [url:bsk70jmr]http://www.carbotecheng.com/[/url:bsk70jmr] build you a set of pads if you send them some old ones. [b:bsk70jmr]Stainless Steel Lines[/b:bsk70jmr] DOT Approved SS Brake Lines are available from [url:bsk70jmr]http://www.diamondstarspecialties.com[/url:bsk70jmr]. Cost was only $109.00 for all 8 lines. These are specifically made for the mirage hatch. I'm not certain if they will work on the sedans. *Note, these may not work with the nonturbo's because of differences in the brake systems. Can anyone confirm this. |
Page 1 of 1 | All times are UTC-05:00 |
Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |