4g61t.org
http://www.4g61t.org/forum/

Clear front running/parking lenses
http://www.4g61t.org/forum/viewtopic.php?f=10&t=305
Page 1 of 1

Author:  LILEVO [ Wed Dec 31, 1969 7:00 pm ]
Post subject:  Clear front running/parking lenses

Here's what you begin with, hard to believe that orange piece is just sitting in there
[img:1cwbxsmo]http://lilevo.com/mods/fblink/jdmready.jpg[/img:1cwbxsmo]

Pull the lens out by pushing out these tabs. You only have to pry open the part of the lens where the orange piece is under, not the whole lens
[img:1cwbxsmo]http://lilevo.com/mods/fblink/tab.jpg[/img:1cwbxsmo]
Pull out the orange piece and seal everything up with some black gasket maker
[img:1cwbxsmo]http://lilevo.com/mods/fblink/orange.jpg[/img:1cwbxsmo]

More Mirage mods can be found here
[url:1cwbxsmo]http://lilevo.com/mods/body_mods.html[/url:1cwbxsmo]

Author:  MIRAGEDOHCTURBO [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 

cool, I was gonna put an amber 12-LED 1157 replacement in there & wire it for turn signals too (getting rid of the front rectangle signals). I think it will look better & shine brighter with that amber plastic removed. nice going.

-vic

Author:  Berserko [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 

The best way I found to under take the procedure is put the lenses in the oven for 5 mins on a piece of tin foil at 200-250 and removoe the orange put them back in the oven for another 3 mins or so that heats up the glue and press back together good as new....

Author:  drcolt2000 [ Wed Dec 31, 1969 7:00 pm ]
Post subject: 

I had to tint mine anyway, so i left it in there, and pulled out the bulb.

Page 1 of 1 All times are UTC-05:00
Powered by phpBB® Forum Software © phpBB Limited
https://www.phpbb.com/