Superpro full kit - C52
Here are the control arm and panhard bushings installed (c52)
The swaybar endlink bushings for a c52 won't work on a C53. Also, the big bushing on the control arm differs for C53.
| 4g61t.org http://www.4g61t.org/forum/ |
|
| Superpro Bushing Question's http://www.4g61t.org/forum/viewtopic.php?f=10&t=19637 |
Page 4 of 4 |
| Author: | LILEVO [ Thu Mar 27, 2008 11:39 pm ] |
| Post subject: | |
Has anyone called/ordered these yet? |
|
| Author: | ColtMax [ Fri Mar 28, 2008 6:19 am ] |
| Post subject: | |
Quote: guys any pics to share of the front suspension modification like the front
Unfortunately no, the pics i posted are not from my car, i took them long time ago on the net.sway bars and the inner front and lower rear control arm. And Jason, are you asking if anybody ordered the bushings or the sway bars? Initially my bushings came directly from Autralia. |
|
| Author: | Berserko [ Fri Mar 28, 2008 7:26 am ] |
| Post subject: | |
I've ordered them direct from whiteline before. I had them within 2-3 weeks |
|
| Author: | pma1123 [ Fri Mar 28, 2008 9:04 am ] |
| Post subject: | |
Superpro full kit - C52 Here are the control arm and panhard bushings installed (c52) The swaybar endlink bushings for a c52 won't work on a C53. Also, the big bushing on the control arm differs for C53. |
|
| Author: | 89coltgt [ Fri Mar 28, 2008 9:06 am ] |
| Post subject: | |
A little tip, use the c52 big control arm bushings, go out and get the saddle mounts for them to bolt them to the c53. |
|
| Author: | ColtMax [ Fri Mar 28, 2008 9:54 am ] |
| Post subject: | |
Quote: A little tip, use the c52 big control arm bushings, go out and get the saddle mounts for them to bolt them to the c53.
Exactly what i did back when i installed them.
|
|
| Author: | Flying Eagle [ Fri Mar 28, 2008 7:09 pm ] |
| Post subject: | |
I knew I had seen those pics above before. I copied them to the archive picture section of my gallery folder and pasted the links. This thread has to stay alive for quite some time before being archived. |
|
| Author: | mikbik [ Fri Mar 28, 2008 9:11 pm ] |
| Post subject: | |
how long does it take to install all those poly bushings? |
|
| Author: | LILEVO [ Sun Apr 27, 2008 1:42 pm ] |
| Post subject: | |
Ok I'm talking with Jesse and Revolution now. If anyone wants some bushings, post the part numbers and I will get him a complete list so he can order them in all one shot. |
|
| Author: | MattGSR [ Sun Apr 27, 2008 3:42 pm ] |
| Post subject: | |
i posted the part numbers on page 2 Jason can u order me a set too while ur at it, just let me know how much...einphoenix@yahoo.com 94541 for shipping quote, thanks |
|
| Author: | CaptainTonus [ Sun Apr 27, 2008 6:28 pm ] |
| Post subject: | |
Quote: Ok I'm talking with Jesse and Revolution now.
I want every conceivable bushing that is available for replacement on a C53A...seriously.
If anyone wants some bushings, post the part numbers and I will get him a complete list so he can order them in all one shot. |
|
| Author: | LILEVO [ Sun Apr 27, 2008 6:32 pm ] |
| Post subject: | |
Part numbers please 
|
|
| Author: | CaptainTonus [ Sun Apr 27, 2008 6:34 pm ] |
| Post subject: | |
Quote: Part numbers please
SPF1160K- Front Control Arm inner front bushing kitSPF1140K- Front Control Arm lower rear bushing kit SPF2092B-4K- Front Sway Bar link bushing kit SPF0427K- Pan Hard Rod Bar bushing kit I guess those are the only part #'s for a C53A? Those are the numbers that MattGSR had listed on page 2 of this thread. |
|
| Author: | turbomirage89 [ Fri May 02, 2008 2:11 am ] |
| Post subject: | |
So what's the latest status on these bushings for a C53A? I want to buy some... |
|
| Page 4 of 4 | All times are UTC-05:00 |
| Powered by phpBB® Forum Software © phpBB Limited https://www.phpbb.com/ |
|